Updating the Date and Time on Your Terminal

Ingenico Terminals

On your Ingenico terminal, the date and time is automatically updated by the application when a transaction is completed.

 To manually adjust the date and time:

1. Press the [F] key
2. Key in Admin password (Default password is: 123456A (for A press 2 then the F key) and press [ENTER]
3. Press the [0] key for Telium Manager
4. Press the [3] key for Initialization
5. Press the [1] key for Parameter
6. Press [ENTER] for Date and Time
7. Select SET DATE or SET TIME by using the arrow keys and pressing [ENTER]
8. Date format is MMDDYYYY
9. Time format is HHMM in military time (1:00 pm = 1300)
10. Press [ENTER] once after correct information has been keyed
11. Press [CANCEL] until Idle screen appears

Verifone Terminals – Omni or Vx Terminals

 Omni or Vx Terminal

1. From the Idle screen, press the [ENTER] key
2. Select SETUP (Usually the [F2] key, but you may need to press the [MORE] purple key until the option appears)
3. Key in password: [1][ALPHA][ALPHA][6][6][8][3][1]
4. Press the [MORE] key until option TIME/DATE appears and select
5. Key in current date (MMDDYYYY)
6. Key in desired time (HHMMSS). Must be in military time (1:00 pm = 1300)
7. Press the [CANCEL] key until Idle screen appears

Hypercom – T7P/T7Plus

 For T7P and T7Plus

1. Press the [INITIALIZE] key
2. If prompted, key in password. Default password is: 0000
3. Press [ENTER] for YES

If this process does not update the date/time on your terminal:

1. Press the [FUNCTION] key
2. Key in [10]
3. Press the [ENTER] key
4. If prompted, key in password. Default password is: 0000
5. Key in the current date (YYMMDD), then press [ENTER]
6. Key in desired time (HHMM). Must be in military time (1:00 pm = 1300)
7. Press the [ENTER] key

Hypercom Optimum T4205/T4220

 For Optimum T4205 and T4220

Adjusting current time

1. Press the [FUNCTION] key
2. Key in [10] and press the [ENTER] key
3. If prompted, key in password and press the [ENTER] key (default password is 000000000)
4. Key in the current date (YYMMDD), then press [ENTER]
5. Key in desired time (HHMM). Must be in military time (1:00 pm = 1300), then press [ENTER]

Lipman (Nurit) Terminal

1. Press the [MENU/ESC] key
2. Use the DOWN ARROW and highlight System Options then press [ENTER]
3. Press the [ENTER] key for set Time/Date
4. Press the [ENTER] key to modify shown Date/Time
5. Key in the current date (MMDDYY) then press [ENTER]
6. Key in the current time (HHMM) then press [ENTER]
7. Press the [MENU/ESC] key three times to return to the Main Menu