Home > TELCEL > Field Services - Demo > Server does not boot

Server does not boot

Table of contents


Server does not boot.


To resolve the issue, follow the steps in this section.


Check for shorts and overloads by removing non-essential items such as extra controller cards or IDE/ATAPI devices.

Keep only the server board, power supply, memory and processor installed. If the system boots, it is possible there is a short or overload with one of the components that you removed or one of those components is faulty. Replace each of non-essential items one at a time until you isolate which one is causing the problem.
If the problem occurs even after removing the non-essential components, the problem has to be with the server board, power supply, memory or processor. In that case please request on-site support.

Last modified


This page has no custom tags.


(not set)
(not set)