To assemble the wand and hose

1. Attach the cleaner head onto the base of the machine ensuring the electrical pins are aligned, as shown below.
2. Attach the wand handle by sliding it on to the top of the machine until it 'clicks' into place.
3. Ensure the hose is straight. Press the red button on the hose.
4. Slide the end of the wand down into the hose and onto the handle to secure.

Attaching the accessory tools

1. Remove the bin and cyclone assembly.
2. Fit the tool holder onto the side of the machine ensuring that it 'clicks' into place.
3. Attach the combination tool.
4. Attach the stair tool.

Watch the simple video below of an easy guide to getting started with your new Dyson.